New, Old Stock, Quantity 1 0619-044-4610

Product Overview: A heating circuit is a power switching circuit supplying one or more resistive heating elements switched by a contactor. The same general rules apply as for motor circuits, except that heating circuits are not normally subjected to overload currents. It is therefore only necessary to provide short-circuit protection. The variation in resistance values between hot and cold states causes a current peak at switch-on which never exceeds 2 to 3 times the rated operational current (In). This initial peak does not recur during normal operation where subsequent switching is thermostatically controlled. The rated power and current of a heater are given for the normal operating temperature. Product Features: Protection: The steady state current drawn by a heating circuit is constant when the voltage is stable. In fact: • It is unlikely that the number of loads in an existing circuit will be modified • This type of circuit cannot create overloads. It is therefore only necessary to provide short-circuit protection. This can be provided by: • GG type fuses, or • Modular circuit breakers. Nevertheless, it is always possible and sometimes more economical (smaller cable size) to protect the circuit by a thermal overload relay and associated aM type fuses. Switching, control, protection: A heating element or group of heating elements of a given power may be either single-phase or 3-phase and may be supplied from a 220/127 V or a 400/230 V distribution system. Excluding a single-phase 127 V system (which is no longer commonly used), the following 3 types of circuit arrangement are possible: • Single-phase, 2-pole switching • Single-phase, 4-pole switching • 3-phase switching General: Manufacturer: Schneider Electric Model Name: Heating Circuits TeSys Contactor Model Number: LC1 F6304 Inventory Number: 0619-044-4610 Specifications: Main: Range: TeSys Product name: TeSys F Product or component type: Contactor Device short name: LC1F Contactor application: Resistive load Utilisation category: AC-1 Poles description: 4P Power pole contact composition: 4 NO [Ue] rated operational voltage: <= 1000 V AC 50/60 Hz, <= 460 V DC [Ie] rated operational current: 1000 A (at <40 °C) at <= 440 V AC AC-1 Complementary: [Uc] control circuit voltage: 48...1000 V AC 40...400 Hz with LX1/LX9 coil, 48...440 V DC with LX4 coil [Uimp] rated impulse withstand voltage: 8 kV Overvoltage category: III [Ith] conventional free air thermal current: 1000 A (at 40 °C), 1250 A Irms rated making capacity: 6300 A AC conforming to IEC 60947-4-1 Rated breaking capacity: 5040 A conforming to IEC 60947-4-1 [Icw] rated short-time withstand current: 5050 A 40 °C - 10 s, 4400 A 40 °C - 30 s, 3400 A 40 °C - 1 min, 2200 A 40 °C - 3 min, 1600 A 40 °C - 10 min Associated fuse rating: 630 A aM at <= 440 V, 1000 A gG at <= 440 V Average impedance: 0.12 mOhm - Ith 1000 A 50 Hz [Ui] rated insulation voltage: 1000 V conforming to IEC 60947-4-1, 1500 V conforming to VDE 0110 group C Power dissipation per pole: 120 W AC-1 Control circuit voltage limits: Operational: 0.85...1.1 Uc AC 40...400 Hz with LX1/LX9 coil Drop-out: 0.25...0.5 Uc AC 40...400 Hz with LX1/LX9 coil Operational: 0.85...1.1 Uc DC with LX4 coil Drop-out: 0.2...0.35 Uc DC with LX4 coil Heat dissipation: 20 W Operating time: 40...80 ms closing for with LX1/LX9 coil, 100...200 ms opening for with LX1/LX9 coil, 60...70 ms closing for with LX4 coil, 40...50 ms opening for with LX4 coil Mounting support: Plate Standards: EN 60947-4-1, IEC 60947-4-1, IEC 60947-1, JIS C8201-4-1, EN 60947-1 Product certifications: ABS, UL, RINA, DNV, CSA, CB, LROS (Lloyds register of shipping), BV, RMRoS Connections - Terminals: Power circuit: Bar 2 cable(s) - busbar cross section: 60 x 5 mm Power circuit: Bolted connection Control circuit: Screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end Control circuit: Screw clamp terminals 2 cable(s) 1…4 mm²flexible with cable end Control circuit: Screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end Control circuit: Screw clamp terminals 2 cable(s) 1…2.5 mm²solid without cable end Control circuit: Screw clamp terminals 1 cable(s) 1…4 mm² Control circuit: Screw clamp terminals 2 cable(s) 1…4 mm² Tightening torque: Power circuit: 58 N.m Control circuit: 1.2 N.m Mechanical durability: 5 Mcycles Inrush power in VA: 1500…1730 VA, 40...400 Hz cos phi 0.9 (at 20 °C)with LX1/LX9 coil, 1420…1920 VA (at 20 °C)with LX4 coil Hold-in power consumption in VA: 20…25 VA, 40...400 Hz cos phi 0.9 (at 20 °C)with LX1/LX9 coil, 6.5…12.5 VA (at 20 °C)with LX4 coil Maximum operating rate: 1200 cyc/h 55 °C Compatibility code: LC1F Environment: IP degree of protection: IP20 front face with shrouds conforming to IEC 60529, IP20 front face with shrouds conforming to VDE 0106 Protective treatment: TH Ambient air temperature for operation: -5…55 °C Ambient air temperature for storage: -60…80 °C Permissible ambient air temperature around the device: -40…70 °C Mechanical robustness: Vibrations contactor open: 2 Gn, 5...300 Hz Vibrations contactor closed: 4 Gn, 5...300 Hz Shocks contactor open: 6 Gn for 1/2 sine wave (11 ms) Shocks contactor closed: 15 Gn for 1/2 sine wave (11 ms) Height: 304 mm Width: 389 mm Depth: 255 mm Offer Sustainability: Sustainable offer status: Green Premium product REACh Regulation: REACh Declaration EU RoHS Directive: Compliant, EU RoHS Declaration Mercury free: Yes RoHS exemption information: Yes China RoHS Regulation: China RoHS declaration, Product out of China RoHS scope. Substance declaration for your information Environmental Disclosure: Product Environmental Profile Circularity Profile: End of Life Information WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins California proposition 65: WARNING Weight (lb): 51 lbs. Bay: 0000 Aisle: 0EE