Sold
This item has been SOLD.
Inventory No.
1120-112-0001
Manufacturer
Gardner Denver
Model No.
VS45-70A
Name
Air Compressor
Arrival Date
06-14-2025
Dimensions L x W x H (inches)
Unavailable
Capacity
76 KW
Electrical
3/60/460
Weight (lb.)
3640
Category
Condition
See Details
Available Quantity
1
Serial No.
S249706
Make Year
2007
Item Details
1120-112-0001
About This Item
Product Overview:
Variable speed compressors from Gardner Denver can efficiently and reliably handle varying air demand. Efficient at full load, part load and no load conditions, the VS Series features expertly designed airends and rotor profiles that offer industry leading turndown and performance. We partnered with an industry leader to develop a motor/drive/airend combination that ensures optimum energy effciency and turndown capability.
Product Features:
The compressor matches the supply of compressed air, at the specified target pressure, to your system's specific demand while minimizing the power required to compress the air. Every area on these compressors were designed so that air flows with the least possible restriction, eliminating every possible kW.
When air is not needed, the VS Series compressors stop running and do not vent to atmosphere; eliminating any waste of compressed air in the reservoir. The starting capability of the AirSmart controller allows the motor to start against a pressurized system at any time and will do so as often as required by the system.
Smart Injection Technology allows the AirSmart controller to maintain the discharge temperature of the compressor above the dew point to prevent condensate from forming in the lubricant.
Computational Fluid Dynamics (CFD) is employed to minimize pressure drop from the air inlet all the way to the air discharge of the compressor. This maximizes efficiency and minimizes your electrical cost of operation.
Finite Element Analysis (FEA) allows the strength and rigidity of a component to be completely understood. If a weak area is identified, design changes are made before the product is produced.
Solid Modeling in the design phase allows these technologies to be applied successfully. In addition, product quality and serviceability are greatly enhanced when viewed and analyzed from a solid model.
General:
Manufacturer: Gardner Denver
Model Name: Air Compressor
Model Number: VS45-70A
Inventory Number: 1120-112-0001
Make Year: 2007
Specifications:
Compressor Family: VS Series
Speed: VSD
Drive Type: Direct
Controller: AirSmart
NEMA Rating: IP54
Air End: T25+
Air End Size: 155 mm
Enclosure: ODP
Lubricant: Aeon 9000SP
Tank Capacity: No Tank
Power: 60 hp
Motor: 45 kW
CFM: 269
Weight: 3640 lbs.