Sold
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
![Haas Haas Vf5 Cnc Vmc]()
This item has been SOLD.
Inventory No.
0920-150-0010
Manufacturer
Haas
Model No.
VF5
Dimensions L x W x H (inches)
Unavailable
Capacity
23" X 52"
Electrical
3/50/60/208/230
Weight (lb.)
14990
Category
Condition
See Details
Quantity
1
Serial No.
19109
Make Year
1999
Item Details
Creative Evolution Control, 20 Position Tool Changer, Coolant Unit, *contains 2 Pieces 0920-150-0010
About This Item
Product Overview:
Haas Vf5 has 10000 rpm, thru coolant spindle, 24 tool side mount tool changer, 4th Axis Ready, 1 MB Memory and New X Axis Ball screw. On our Floor now, fully powered tested and is in Great working condition.
Product Features:
• 30 Hp High Torque Spindle Motor
• Through-Spindle Coolant system
• 4th Axis Ready (drives and wiring installed)
• 1 MB Program Memory
• Remote Jog Handle
• Rigid Tapping
• High Speed Machining
• Advanced Tool Management
• Power Failure Detection Module
• User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling
• Brush-type servo drive motors on all axis
• 24 automatic Side Mount tool changer
• Programmable coolant
• Telescopic way covers
• Chip auger
• Floppy Drive
• High Intensity Lighting
• 95-Gallon flood Coolant system
General:
Manufacturer: Haas
Model Name: Vertical Machining Center
Model Number/MPN: VF5
Inventory Number: 0920-150-0010
Series: 19109
Make Year: 1999
Condition: Very Good
Power Requirements:
Air Required: 100 psi, 4 scfm
Power: 220V, 3-Phase
Travels:
Cutting Feed Rates: 650 ipm
Spindle:
Speed Range: 0 to 10000 rpm
Spindle Power: 30 hp
Max Torque: 90 ft.-lb, 2000 rpm
Specifications:
Aisle: 07B
Bay: 3800
Weight (lb): 14990 lbs.
Capacity: 23 x 52 in.
Overall Dimensions: 136 x 100 x 105 in.
Travels:
X-Axis: 50 in.
Y-Axis: 26 in.
Z-Axis: 25 in.
Rapid Traverse Rates: 1000 Inch Per Minute
Spindle Nose to Table (Min.-Max.): 4 to 29 in.
Table:
Length: 52 in.
Width: 23 in.
Number of Std T-Slots: 7
T-Slot Width: 5/8 in.
Spindle:
Taper Size: CAT 40
Automatic Tool Changer:
Max Tool Diameter: 6 in.
Max Tool Length: 16 in.
Tool Changing Time: 3.0 Sec