Collet Closer, 8" 3 Jaw Chuck, Tool Holder, Tail Stock, Acu-rite Qwikcount Ii Digital Readout 0321-069-0003

Product Overview: Clausing Colchester geared head engine lathes are the industry standard for conventional lathes because the quality built into every machine translates into real long-term performance in your application. Rugged construction, consistent quality in design and production and the “human engineering” which makes the operator more efficient, all make this lathe a cost-effective investment. Product Features: • Fully-geared headstock with 12 spindle speeds • All headstock gears are hardened and ground • Headstock shafts are splined and turn on anti-friction bearings • Spindle bearings, gears and shafts are lubricated by a forced lubrication system • A broad range of feed and thread selections are available by using three selector levers and 8-position rotary dial • Precision Gamet spindle bearings • Cross slide runs along a dovetail guide • Bed wipers and an apron mounted one-shot lubrication pump • The cast iron apron is totally enclosed and splash bath lubricated • Gap bed with easy-to-remove bed blocks • 40″ center distances • Equipped with chuck guard, full splash guard and lead screw cover • Clutch drive, reverse lead screw with spindle turning for faster thread cutting • Extra wide bed provides accuracy and minimal wear General: Manufacturer: Clausing/colchester Model Name: Geared Head Lathe Model Number/MPN: 13 Inventory Number: 0321-069-0003 Series: 5/0014/07956 Specifications: Aisle: 08B Bay: 3000 Weight (lb): 2230 lbs. Capacity: 13 x 40 in. Capacity: Height of Center: 6 1/2 in. Depth of Center: 40 in. Swing over Bed: 13 in. Swing in Gap: 18.8 in. Width in Front of Faceplate: 4 1/2 in. Swing over Cross Slide: 8.26 in. Bedway Width: 12 ½ in. Headstock: Spindle Bore: 1 1/2 in. Spindle Nose: D1-4 Spindle Nose Taper: 3 M.T. Spindle Speeds: 40 to 2500 rpm (12 Steps) Cross/Top Slide: Travel Cross Slide: 7-1/2 in. Width of Cross Slide: 5-1/2 in. Travel of Top Slide: 3.63 in. Width of Top Slide: 3-1/4 in. Tailstock: Quill Travel: 4.38 in. Quill Diameter: 1.63 in. Quill Taper: 3 M.T. Feeds and Threading: Longitudinal Feed Range: 0.001 to 0.039 in. /rev. Number of Inch Pitches: 35 Range of Inch Pitches: 2 to 56 TPI Number of Metric Pitches: 39 Range of Metric Pitches: 0.2 to 14 mm Number of Diametral Pitches: 18 Range of Diametral Pitches: 8 to 56 DP Number of Module Pitches: 18 Range of Module Pitches: 0.3 to 3.5 MOD Spindle Motor: 3 hp