Allen Bradley Panelview Plus 400, Nordson Hot Melt Unit, *contains 2 Pieces 0221-068-0001

Product Overview: Pearson’s CS40 Case Sealer top seals a wide-range of case sizes using hot melt glue or tape at speeds of 40 to 67 cases per minute depending on case length. A convenient bypass option eliminates the need for additional conveying when pre-sealed boxes or HSCs are introduced into the line. Advanced features such as high-visibility machine status lighting, non-contact interlocks, CAT-3 Safety Circuits, an easily accessible grace port and an auxiliary operator station are standard on the machine. Product Features: Optimal Case Infeed Gaps: • A built-in metering stop creates gaps between cases without the need to adjust infeed conveyor speed for each case. Case Squareness Protection: • Spring loaded synchronous compensating side belts and squaring wheels ensure cases remain square throughout the closing and sealing process. Secure Glue Bond: • Urethane compression wheels guarantee a secure glue bond prior to the case exiting the machine by providing variable, regulatable pressure for compressing the glue lines. Detect Tape Related Errors: • Sensors detect fail-to apply, fail-to-cut and low tape situation. Fast Changeover: • Fast changeovers are supported by the industry’s most advanced HMI with an uncluttered design, intuitive navigation, interactive changeover and fault-recovery guides, live sensor maps and advanced maintenance features. Scales, pointers and quick release handles ensure additional tools are not necessary. Trained technicians can complete a changeover in under 3 min. Reduced Air Consumption, Less Maintenance, Higher Speeds: • Servo-controlled trailing flap kicker increases speed, component longevity and reduces expensive air consumption by replacing air cylinders. Bypass Option for Pre-Sealed Boxes or Without Tops: • No need to build by-pass conveyors when running cases not requiring sealing. Safety Redundancy with CAT 3: • Dual channel safety circuit maintains integrity of safety features in case of single component failure. Highly Reliable Non-Contact Interlocks: • Eliminates misalignment of guard door interlocks which prevents problems common to keyed interlocks. High-Visibility Machine Status: • A standard four-light LED beacon and multi-color interior machine lighting provides high-visibility of machine status. Easily Accessible Grace Port: • Grace ports provide convenient communication access and 110V convenience outlet at the outside of the machine’s electrical cabinet. Convenient Dual Access to Machine: • An auxiliary operator station enables machine control on both sides of the conveyor. Remote Access Capability: • Allows Pearson’s support team on-demand access to the equipment’s PLC and HMI through a secure VPN connection via an e-WON router to support emergency troubleshooting and reduce on-site visits. General: Manufacturer: Pearson Packaging Systems Model Name: Packaging System Model Number/MPN: CS40 Inventory Number: 0221-068-0001 Series: 2013CS4013177 Make Year: 2013 Power Requirements: Power: 460V ac and 30A Specifications: Aisle: 09A Bay: 3500 Weight (lb): 2480 lbs. Speed: 40 to 67 cases/min Min. Case Size: 8 L x 4.75 H x 5 W in. Max. Case Size: 24 L x 18.5 H x 16 W in. Sealing: Hot Melt Glue and Tape Operation: Servo Changeover: 3 min Construction: Low Pressure Wash down, Mild Steel and Stainless Steel Machine Size Range (ft.): 11-14.5 L x 5 H x 5 W ft. Controls: Allen-Bradley Compact Logix PLC, PackML Compliant and Panel View Color HMI Air Requirements: 80 psi Air Consumption: Glue: 0.100 SCF/Cycle Tape: 0.046 SCF/Cycle Full Load Amp of Base Machine: Glue: 25.2 Amps Tape: 15.1 Amps