The Model CTB400 band Saw Machine is developed for high production, accuracy, and economic cutting. This state of the art machine is specifically designed to use the multifaceted Amada carbide band saw blade. The combination of these two has achieved an excess of 95cm²/min cutting rates, surface finishes in the range of 62 RMS while holding accuracy's well within the + - 0.05/mm of diameter.
The World's first CNC OPTIMAL CUTTING CONTROL (patent pending) presets feeds and speeds according to material specification. This unit has 229 factory installed material specs, with 100 available for custom materials. Feeds and speeds are automatically set to achieve the most economical cutting with the highest productivity possible, while maintain noise levels below 85 decibels.
- Anti Vibration Guide Roller
- Automatic Blade Guide Setting
- Automatic Wire Brush Setting
- Blade Deviation Monitor
- Chip Conveyor
- Front and Rear Vise (Full Stroke)
- Inverter Driven Variable Blade Speed
- Material Separation at End of Cut
- Motion Detector
- Plasma Display
- Preset Auto Trim Cut
- Re-Circulating Coolant System
- Safety Interlocks
- Self-Diagnostic Cnc
Model Name: Vertical Band Saw
Model Number/MPN: CTB-400
Inventory Number: 0220-100-0001
Series: 4185 0085
Make Year: 1999
Power: 16.6 kva
Pressure Setting: 640 psi
Weight (lb): 13665 lbs.
Capacity: 20 x 17 in.
Length: 88.9 in.
Height: 90.7 in.
Width: 89 in.
Round (Diameter): 1.18 to 16 in.
Rectangle (W x H): 1.18 x 0.5 to 16 x 16 in .
Blade and Vise Operation:
Saw Blade: 1-1/2 x .055 x 15.6 in.
Saw Blade Speed: 50 to 492 fpm
Saw Blade Motor: 10 hp
Hydraulic Pump Motor: 2 hp
Cutting Fluid Pump Motor: 1/4 hp
Wire Brush Motor: 1/8 hp
Tank Capacity: 60.8 gallon
Pump Type: Electric
Tank Capacity: 9.2 gallon
Chip Disposal: Chip Conveyor
Work Feed Stroke (Front Vise): 11.8 in.
Work Feed Stroke(Rear Vise): 15.7 in.
Feed Length: 0394 to 393.69 in.
Number of Cut-Lff Pieces: 1 to 999
Remnant Length: 059 in.